Различия

Показаны различия между двумя версиями страницы.

--- it:debian:errors [2021/01/19 10:30] – создано ura2404
+++ it:debian:errors [2021/08/30 12:33] (текущий) – ura2404
@@ Строка 1: / Строка 1: @@
 ====== Ошибки ======
-----
+----
 <code bash>
+$ dmesg
+....
 [    4.950114] i915 0000:00:02.0: firmware: failed to load i915/skl_dmc_ver1_27.bin (-2)\\
 [    4.950118] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
+....
 </code>
@@ Строка 13: / Строка 16: @@
 <code bash>
+$ dmesg
+....
 [    0.032301] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
+....
 </code>
@@ Строка 19: / Строка 25: @@
 ----
+<code bash>
+$ dmesg
+....
+[   10.901814] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
+[   10.901863] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
+[   10.901910] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
+[   10.901913] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
+[   10.902114] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
+....
+</code>
+>$ sudo apt install firmware-realtek
+для 11 debian установить пакет __**r8168-dkms**__
+----
+<code bash>
+$ dmesg
+....
+[   43.980736] nouveau 0000:01:00.0: firmware: failed to load nouveau/nvc1_fuc084 (-2)
+[   43.980741] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2
+....
+</code>
+[[ https://nouveau.freedesktop.org/VideoAcceleration.html]]
+>$ mkdir /tmp/nouveau
+>$ cd /tmp/nouveau
+>$ wget https://raw.github.com/envytools/firmware/master/extract_firmware.py
+>$ wget http://us.download.nvidia.com/XFree86/Linux-x86/325.15/NVIDIA-Linux-x86-325.15.run
+>$ sh NVIDIA-Linux-x86-325.15.run %%--extract-only%%
+>$ python2 extract_firmware.py  # this script is for python 2 only
+># mkdir /lib/firmware/nouveau
+># cp -d nv* vuc-* /lib/firmware/nouveau/
+----
+Если память не ECC, то будет такие варнинги, нужно заблокировать модуль **amd64_edac_mod**.
+<code bash>
+$ dmesg
+....
+[    6.516505] EDAC amd64: Node 0: DRAM ECC disabled.
+[    6.516507] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
+                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
+                (Note that use of the override may cause unknown side effects.)
+....
+</code>
+>$ echo "blacklist amd64_edac_mod" >> /etc/modprobe.d/blacklist.conf
+----
+Не определяются устройства в usb2.0\\
+mb: Gigabyte GA-970A-DS3P
+>xHCI Handoff - включена
+>eHIC Handoff - включена
+>Контроллер IOMMU - включен
+>gdub добавить параметр iommu=soft